Skip to main content

Our Solutions

Foundation engineering for architects and engineers

Foundation engineering for architects and engineers

Our Solutions

Foundation engineering for architects and engineers

Foundation engineering for architects and engineers
Explore

SPEEDECK’s in-house geotechnical and structural engineers design piled raft foundations for residential, later living and lightweight commercial schemes across Southern England and the Midlands. We design to Eurocodes and British Standards, and our PI insurance covers all of our geotechnical and structural design work.

Most of our enquiries start with an engineer’s tendered design. We review it against the site investigation and, where it suits the ground, price a piled raft alternative.

design by SPEEDECK 2

How we design

  • Finite element modelling: soil–structure interaction is modelled at tender stage to refine slab thicknesses and reinforcement, and remove over-engineering. Design & Engineering
  • Pile design in-house: piles are designed alongside the raft, not as a separate subcontract. Geotechnical Engineering
  • Heave design on every scheme: heave risk is assessed plot by plot, so void formers go only where the ground and trees need them.
  • Ground gas: gas protection designed to BS 8485, subject to warranty approval.
  • Full design pack: GA and RC drawings, geotechnical and structural calculations, and a heave report where needed, ready for Building Control and your warranty provider. Structural Calculations
Alkerden Chartway Kent Completed Housing Foundations from SPEEDECK

Engineering results

  • Farnborough Road, Nottingham (GEDA / NCHA): later living scheme of 50 apartments, 14 supported flats and 6 bungalows. Our ground assessment removed heave precautions across more than half the site, and FE modelling refined slab thicknesses under high point loads.
  • Alkerden, Swanscombe (Chartway): chalk 5–35m deep below quarry fill. Pile load testing justified piles about 15m shorter than the 30m+ that might otherwise have been needed.
  • Kings Down, Bridgwater (Countryside): 80 homes on soft tidal flat deposits. CS2 gas protection without venting, no heave precautions, and around 15m saved per pile compared with driven piling.

Foundation Construction in Four Simple Steps